Wood Flooring Refinishing Guide

Wood flooring refinishing breathes new life into old, dull hardwood floors. Often, older homes have gorgeous hardwood floors waiting to be discovered underneath old, tattered carpet. If you discover this hidden gem in your home, consider giving those floors a new life with the right fix.

The first step in brightening up your floors is determining whether or not the boards are good candidates for the process. If you find that the boards are warped, buckled, soft, soggy, or saggy, they need to be replaced. If they are dull and scratched, but otherwise solid, then it is time to look into wood flooring refinishing.

The hardest part about the process is sanding the floors. Use a drum sander with 20 to 36 grit sandpaper to buff up the floor. Start slowly, as the machine can scuff your floors. After you place the sander in place, walk forward along the grain of the hardwood, from one half of the wall to the other, making two passes over each row. Do not allow the sander to sit for even a second or two in one spot. Always keep moving. Then, use an edge sander to finish the job. Repeat the process with a medium grit sandpaper and a fine grit sandpaper.

When you are done sanding, you will find dust all over the room. The next step in wood flooring refinishing is cleaning up all of that dust. Leaving any of it on the floor when you stain it will cause problems. Use a shop vac to thoroughly clean the room.

The next step is staining the floor. Follow the directions on the stain, and be sure to ventilate the room. Always follow behind yourself with a clean rag to wipe up any excess stain. Leave the stain to dry overnight before sealing it or walking on the floor.

Once the floor is clean and stained, apply sealant. Use around three coats, and allow three hours for it to dry before adding another coat. If you choose a water-based urethane as your finish, you will need more than three coats. Be careful about stirring up dust while the finish cures on the floor. Leave it for approximately three days before putting your furniture back.

Wood flooring refinishing is a huge time commitment as a do-it-yourself project. Homeowners who do not have excessive amounts of time to spend on home improvement projects can hire a professional to do the task. Professionals are trained on using the sander and quickly applying the stain and sealant. For those with busy schedules, hiring someone to do their wood flooring refinishing is a cost-effective option.

If you think your home could use a wood flooring refinishing NYC specialists can help you. For more information visit

Modern furniture stores NYC Shop online for home and office furniture

A web shops sells furniture pieces with their pictures and descriptions. Advantage of online shopping is that you can filter your search and locate the fittings that you want.

Looking for modern furniture stores nyc that can provide you fittings of latest designs and colors? If yes then look online. There are many web shops that sell furniture hence you can enjoy shopping around. You can visit websites instead of physical stores and see pictures of the fittings and not real pieces.

A web shops sells furniture pieces with their pictures and descriptions. Advantage of online shopping is that you can filter your search and locate the fittings that you want. For instance, you can go to the chairs section and choose the kind of chairs you want. You can choose dining chairs, loungers, wheel chairs, arm chairs and many varieties. Similarly you can find sofa sets and sofa beds.

You’ll see pictures of the fittings and also read their description. The description contains information on the measurement of the furniture in the picture, material used in making the piece and its price. You can find the description of a fitting by clicking on its picture. After going through the description, you can determine whether the piece in the picture will suit to your needs. Similarly you can find fittings for other rooms like living room, dining room and bedroom from an online shop.

Greatest advantage of online shopping is ease of shopping. Also you will see a wide range of modern fittings. Online modern furniture stores NYC keep comprehensive range of home and office furniture. They are able to keep a large range of fittings because they display pictures and not real goods that are stored far away in the physical stores of the online showrooms. As soon a piece of furniture is sold, it is delivered from the physical store.

There is no hassle is dealing with online modern furniture stores NYC as they use safe payment gateways. You can buy home and office fittings from online showrooms. You’ll be amazed to find all the varieties of home and office furniture in online stores. Here you can take an example of Lider office chairs. These chairs are special office accessories. They are available at cost effective price on web stores.

The only precaution you need taking with online modern furniture stores NYC is that never do business with unreliable stores. Before making any deal with an online shop, make sure that it is reliable. It should have a refund policy so that you can get your money back, if you change your mind.

About Author

Matthew Naatz is well known name in writing about the furniture, and especially different types of chairs like office chair, tulip chair etc. His work has been able to attract a number of customers to get decisive about buying new chair in the market. For more information visit designer glass table and eames office chair.

How to Keep Your Stone Tile Flooring Clean

There is a lot of time, money and thought that goes into purchasing the perfect NYC stone tiles

There are so many different types of stone tile available – slate, marble, quartzite, granite and more. Each one is not only attractive in its own away, but a permanent addition to your home. By cleaning your tile on a regular basis, you can ensure that your family is not breathing in dust and allergy-causing spores, and that your home is looking its best. Stone flooring needs special care, and cannot be washed like linoleum or wood flooring. Certain retail cleaning items can be too harsh on stone flooring and leave behind a nasty residue or film. On the other-hand, using something you already own, say vinegar, can be too acidic for NYC stone tiles to handle, and can create permanent damage and discoloration.

If you want to clean your stone flooring properly, you should follow the following steps: first, you should get a broom and sweep up any loose bits of dirt and debris. Alternately, you can use a vacuum if it is easier – but make sure to switch out the heads on the vacuum, and use a soft-brush attachment to make sure you do not scratch the floor.

Next, you should fill a bucket with hot water and dip a (clean) mop into it. Afterwards, squeeze out any extra water, and clean the floor with it. Repeat as necessary, but remember to continuously dip the mop into the bucket to make sure it stays wet. If your floor is exceptionally dirty, you can add some mild soap to the water and that will help get rid of any sticky messes or deep stains. Do not forget to run a non-soapy mop over the soapy NYC stone tiles, so that your floor will be fully clean.

After you are done mopping the floor, make sure all of the soap residue is gone, and double-check the surface area for any leftover stains. Next, dry the floor with a clean, soft rag to get rid of excess moisture and ensure that the floor is no longer slippery and is fully dry. As with any flooring material, stone tiles are susceptible to dirt and build-up.

By maintaining regular sweeping, soaping and mopping, you can keep your floor clean and looking orderly.

In the Name of Best Home Interior, Get Furniture NYC

When you do home furnishing, you have to be prepared and know which furniture NYC store will provide and deliver the kind of furniture you need. Taking the matter seriously will result in a well-furnished home and in the end you will feel fulfilled. Thus, don’t ignore these helpful tips in the name of having the best home interior and furniture treasures. Plan ahead and picture your house having the furniture NYC items you want. Proper visualization of your plans should be done at once. Make sure everything compliments with each other, the wall colour should match your furniture items. Consistency is important, hence, you have to blend your ideas with the realistic perspectives in home decorating. Don’t exaggerate. Yes, you have to be creative but your creativity should be based on concrete foundations in home furnishing. Theme selection for your furniture items is highly necessary. Once you have set your theme right, everything follows afterwards. You can have different themes in every part of your room, yet you need to establish one connecting point to create a bigger impact. In these modern times, contemporary pieces of furniture NYC are the trend. Hence, you need to select furniture creations that will exude both modernity and your preference. Finally, decide on whether you want to replace all your furniture items with new ones. Since you know that your old furniture can still be mixed with contemporary ones to maintain a vintage and contemporary look at the same time.

Mabelle Sese

http://www.modani.com/store/furniture-nyc.php

Money Saving Ideas Better Energy Efficiency For Your Home

The big-city housing crunch that has long since been a financial issue to many homeowners is made more of a burden with the economic turmoil that hit not only New York and the US but the entire world as well. Now, more than ever is the best time to be looking for effective ways to save money and one of the smartest moves is cutting back on the area which eats a good part of your monthly income and that is the energy bill of your NYC home. This article looks into great ideas to achieve better efficiency for your home which are practical whether you are in Brooklyn, Queens, Staten Island, Long Island, or Manhattan.

Here are top ideas in making just any home more energy efficient and lower monthly energy bills:

Lighting

Being one of the most basic of elements that makes a house livable, many lighting fixtures are needed to make just any room more ambient as well as functional. With lighting, saving energy can be carried through in many ways including:

. Maximize use of natural lighting and lessen the use of electricity during day time
. The replacement of current set of lighting fixtures with energy-efficient models that uses up less electricity for the same brightness given off
. Amplifying the effects of lights by using mirrors and other reflective items in the design of the room
. Making use of lighting controls that prevents unnecessary use of lights

Ensure Proper Sealing and Enough Insulation

Leaks are silent killers that prey on your heating and cooling without you knowing. This results to the escape of heat or cool that should be maintaining the comfort inside the house. And before you spot it, your bills have already ballooned. You can have a contractor inspect your house for possible leaks and remedies should be done as needed.

Making your HVAC systems work harder than they normally do results to lower operation costs and thus lower figure on the energy bill. Other than this benefit, a well insulated and sealed home promotes optimal indoor comfort as well as an increase in the overall value. But one pitfall that many homeowners fall into is believing that the only areas in the house needing insulation are the attic and exterior walls. To ensure enough insulation, extend your efforts to kneewalls, adjoining walls from one room to another, basement walls, floors, overhangs, and ceiling especially below unheated spaces.

Energy-Saving Appliances and Systems

Though the initial cost of buying energy efficient appliances may be huge, the products would sure prove more valuable than the original price they cost. With these models, the comfort and functionality that is enjoyed in the house can still be maintained and even be enhanced without much consuming much energy. When shopping, choose those labeled with Energy Star.

Use Renewable Energy

Using natural resources to power some functions in your home can be one of the best ways to achieve energy efficiency. Technological advancements have paved way to integrate the use of solar heat, wind, or geothermal energy to power homes. These are often stored and converted to electricity or utilized to heat liquid fuels or heat water.